Pair of safety locks for cabs Fiat Ducato 230, Peugeot Boxer, Citroën Jumper 1994 - 2002

Assembled using screws supplied with door handle

1 pair of locks (1 x left / 1 x right) with 4 keys

OPERATING INSTRUCTIONS :
- Pressing the knob closes or opens the door.
- The knob locks automatically as soon as the deadbolt is completely unscrewed or screwed in.
- Turning the key locks the position of the bolt: closed or open.
- The door can be opened by turning the knob.

ASSEMBLY INSTRUCTIONS :
- Remove the door handle and unscrew the screw using a 5 mm Allen® key.
- Position the HEOSafe® lock between the armrest and the door.
- Secure the lock again with the available screw (5 mm Allen® key).

IMPORTANT INSTALLATION TIP:
After fitting, close the door slowly and ensure that the lock passes the rubber seal without any problems.
If the distance is very narrow, or even if the rubber gasket is facing inwards, the gasket may be damaged so that it can be wedged between the lock and the door frame (column B of the body). In this case, take the following steps:
- Check that the rubber gasket is correctly positioned.
- When the gasket is in place, remove it and, using pliers, bend the metal flange at the top of the lock outwards. The rubber seal moves inwards. The seal is protected against damage.
- If the distance between the latch and B-pillar is too great, or if the latch cannot be closed, adjust the door or have it adjusted by a tradesperson.