Pair of safety locks for Renault Master, Opel Movano, Nissan NV400 2010+ and Iveco Daily 2014+ cabs

Assembly on door frame

1 pair of locks (1 x left / 1 x right) with 4 keys + Additional piece (B-pillar bolt stop)

Cylinder lock


OPERATING INSTRUCTIONS :
- Pressing the knob closes or opens the door.
- The knob locks automatically as soon as the deadbolt is completely unscrewed or screwed in.
- Turning the key locks the bolt position: closed or open.

INSTALLATION INSTRUCTIONS :
- Position the lock on the door frame. The distance between the lock case and column B should be approximately 3 mm.
- At latch height, push the rubber gasket between column B and the cabin lining.
- Position the lock so that the closed bolt pushes against the lining.
- Now you can mark the holes.
- Remove the lock and drill a pilot hole using a 3.2 mm bit.
- Secure the special tapping screws with a 4 mm Allen® key.

IMPORTANT ASSEMBLY INSTRUCTIONS :
After installation, close the door gently and make sure that the HEOSafe® lock box passes through the rubber seal without any problems.

For further information, please do not hesitate to contact us: