Pair of security locks Mercedes Sprinter 906 & Volkswagen Crafter 2006 - 2018

Door frame assembly

1 pair of locks (1 x left / 1 x right) + Additional part (B-pillar bolt stop)
Locking lock, not lockable

OPERATING INSTRUCTIONS :
- Press the turning knob to close or open the door.
- The turning knob locks automatically as soon as the deadbolt is completely unscrewed or screwed in.

INSTALLATION INSTRUCTIONS :
- Position the lock on the door frame. The distance between the lock box and column B should be approx. 3 mm.
- At latch height, push the rubber gasket between column B and the cabin lining.
- Position the lock so that the closed bolt pushes against the lining.
- Now you can mark the holes.
- Remove the lock and drill a pilot hole using a 3.2 mm bit.
- Secure the special tapping screws with a 4 mm Allen® key.

IMPORTANT ASSEMBLY INSTRUCTIONS :
After installation, close the door gently and make sure that the HEOSafe® lock box passes through the rubber seal without any problems.

For further information, please do not hesitate to contact us: