Menu
-
MenuBack
-
-
-
INFO & ADVICE
-
INFO & ADVICE
-
-
-
4X4 & PICKUPS
-
-
-
OFFROAD EQUIPMENT
- Straps, shackles and pulleys
- Jacks, plates and shovels
- Winch plates
- Winches
- Winch accessories
-
ARB air lockers
- Isuzu
- Nissan
-
Toyota
- FJ Cruiser
- Hilux Revo
- Hilux Vigo 2005-2011
- Hilux Vigo 2012-2015
-
Land Cruiser
- Serie 60 1980-1990
- Serie 70 1985-1996
- Serie 71 1985-1999
- Serie 73 1985-1999
- Serie 74 1999+
- Serie 75 1991-1999
- Serie 76 2007+
- Serie 78 1999-2007
- Serie 78 2007+
- Serie 79 2007+
- Serie 80 1990-1992
- Serie 80 1992-1998
- Serie 90 1996-2004
- Serie 150 2017+
- Serie 200 2007-2012
- Serie 200 2012-2015
- Serie 200 2015+
- Serie 79 1999-2007
- Jeep
- Land Rover
- Suzuki
- ARB spare parts
- Ford
- Mitsubishi
- Volkswagen
- Huyndai
- ARB compressor
-
-
-
STAINLESS EXHAUSTS
-
FUEL & OIL ADDITIVES
-
BODYWORK ACCESSORIES
-
-
-
ENGINE TUNING
-
SKID PLATES
- Differential covers
- Front and rear bumpers
- Front bull bars
- Land Rover armor
- N4 Skid Plates
- Rival skid plates
- Rockalu skid plates
- Shock absorbers
- Side steps & rock sliders
-
-
-
VANS
-
-
-
-
-
-
PEUGEOT/CITROEN
-
-
-
-
ROADTRIP
-
-
ROOF RACKS, BIKE CARRIERS, ACCESSORIES
-
-
NAVIGATION & COMMUNICATION
-
-
OFFROADING
-
ARB air lockers
- ARB compressor
- ARB spare parts
- Ford
- Huyndai
- Isuzu
- Jeep
- Land Rover
- Mitsubishi
- Nissan
- Suzuki
-
Toyota
- FJ Cruiser
- Hilux Revo
- Hilux Vigo 2005-2011
- Hilux Vigo 2012-2015
-
Land Cruiser
- Serie 150 2017+
- Serie 200 2007-2012
- Serie 200 2012-2015
- Serie 200 2015+
- Serie 60 1980-1990
- Serie 70 1985-1996
- Serie 71 1985-1999
- Serie 73 1985-1999
- Serie 74 1999+
- Serie 75 1991-1999
- Serie 76 2007+
- Serie 78 1999-2007
- Serie 78 2007+
- Serie 79 1999-2007
- Serie 79 2007+
- Serie 80 1990-1992
- Serie 80 1992-1998
- Serie 90 1996-2004
- Volkswagen
- Jacks, plates and shovels
- Straps, shackles and pulleys
- Winch accessories
- Winch plates
- Winches
-
ARB air lockers
-
-
-
-
WHEELS
-
-
-
MANUAL LOCKING HUBS
-
-
-
-
COMPRESSORS
-
-
-
SPARE WHEEL CARRIERS
-
-
-
SUSPENSION
-
-
-
STEERING DAMPERS
-
-
-
PEDDERS SUSPENSION
-
-
-
-
OTHER BRANDS
-
ACCESSORIES
-
-
-
MANUFACTURERS
-
-
Fournisseurs
- Actifleet (marchepied électrique)
- Aeroklas (rebords de benne pickup)
- Agency 6
- Alu-Cab
- AquaSignal
- ARB
- Asfir (pare-chocs)
- AVM (moyeux débrayables)
- Ballistic (Jantes alu)
- Black Rhino
- Braid (jantes)
- Bravo (snorkels)
- Come up (treuils et accessoires)
- Core
- CRT (Cb et Vhf)
- DBA
- Desert Service Shop
- Deuro
- Dometic
- Donaldson (préfiltres cycloniques à air)
- Dotz
- Dutch Van Parts
-
-
-
-
- EFS (amortisseurs de direction)
- Engel (frigos de raid et accessoires)
- EZ Down (vérins de hayon pickup)
- Front Runner
- Gobi-X
- Goss (jantes tole 4x4)
- Green Filter (filtres à air de remplacement)
- HEOSafe
- Hi Lift (crics et accessoires)
- Hofmann (élargisseurs de voie alu)
- Ikamper (tentes de toit)
- Ironman (equipements et suspension)
- James Baroud (tentes de toit)
- JSA Suspensions
- King Springs : le plus grand fabriquant de ressorts en Australie
- KMC (jantes alu)
- Koni (amortisseurs)
- Lazer (barres de leds)
- LRA (réservoirs de remplacement et additionnels)
- Manano Jantes renforcées
- Marlow (cordes et sangles)
-
-
-
-
- Maxtrax (plaques désensablage)
- MayhemWheels (Jantes)
- Mecacyl (hyper-lubrifiants)
- Metec (marchepieds et blindages)
- Misutonida
- Mountain Top (accessoires pickup)
- MTP 4x4
- N4 (Blindages alu)
- National Luna (matériel électrique)
- Nolathane (cales réhausse)
- O.C Wheels (jantes)
- OME Old Man Emu
- Outback Import (accessoires)
- OWL Vans
- P2S
- Parker (préfiltres à carburant)
- Pedalbox (amélioration accelération)
- Pedders (suspension)
- Petromax
- President (postes CB)
- Ram Mounts
- Rhino Rack
- Rival (blindages, pare-chocs, vérins et galeries)
-
-
-
-
- Rockalu
- Safari
- SNUG
- SumoSprings
- Superpro (cales réhausse et silent-blocs)
- Tailgater Tire Table
- Tecinox (échappements inox)
- Terrain Tamer
- Terrawagen
- The Nomad Fox (caisses , sangles et rangement)
- Tmax (accessoires franchissement)
- Tough Dog (Amortisseurs de direction)
- Van Compass
- Viair (compresseurs)
- Vision x (barres de leds et phares)
- Warn (treuils et accessoires)
- Wombat (suspensions)
-
-

Le kit de galerie de toit Slimline II de Front Runner est la solution parfaite pour transporter votre matériel sur votre Suzuki Grand Vitara. Cette galerie de grande taille est fabriquée en aluminium de haute qualité et est conçue pour résister aux longs trajets. Les pieds Rail Grip s'installent facilement et en toute sécurité sur les barres de toit d'origine. La galerie de toit est discrète et comprend un déflecteur de vent afin de ne pas ajouter trop de bruit de vent ou de traînée. Grâce à sa conception modulaire, elle peut être personnalisée avec plus de 55 accessoires.
Kit de galerie Slimline II pour Suzuki Grand Vitara (2022 - )
KRSV004T
€1,033.61
Tax included
Le kit de galerie de toit Slimline II de Front Runner est la solution parfaite pour transporter votre matériel sur votre Suzuki Grand Vitara. Cette galerie de grande taille est fabriquée en aluminium de haute qualité et est conçue pour résister aux longs trajets. Les pieds Rail Grip s'installent facilement et en toute sécurité sur les barres de toit d'origine. La galerie de toit est discrète et comprend un déflecteur de vent afin de ne pas ajouter trop de bruit de vent ou de traînée. Grâce à sa conception modulaire, elle peut être personnalisée avec plus de 55 accessoires.
The Slimline II full-length roof rack (1156mm/45.5") contains the Slimline II tray, a wind deflector and 2 pairs of Rail Grip feet for mounting the Slimline II tray on your Suzuki Grand Vitara. The tray is easily installed by fitting the foot on the original rails. No modifications required.
All Front Runner galleries come with a mounting guide and all the components needed to install the Slimline II tray on your vehicle.
NOTE: your vehicle must be equipped with original roof rails to use this roof rack kit.
This roof rack kit can be removed, leaving your vehicle's original roof and rails in their original condition.
All Front Runner roof racks come with a limited lifetime warranty*.
Roof racks mounted on original rails are designed as a "lightweight" loading solution. Please consult your vehicle owner's manual for the manufacturer's recommended load rating and do not exceed these limits.
For optimum load capacity, we recommend that there are no overhangs (with the exception of sports equipment) and that all weight is evenly distributed on the rack.
Motored roof rack kits on original rails are not suitable for extreme off-road conditions, so you should consider an alternative Front Runner mounting solution if this is your objective.
Please contact us for advice on mounting solutions specific to your vehicle and its use.
NOTE: Tables under roof racks are not suitable for this roof rack kit.
Please note: The maximum load for kits with original vehicle side rail mounting with ''Grab-on'' feet must not exceed 40 kg and must be evenly distributed.
KRSV004T - Slimline II roof rack kit for Suzuki Grand Vitara (2022- to present)
Consists of :
2x GOFR001 - Rail foot base (pair)
2x GOFR014 - External handles for flush rail / No. 6
2x GOFR032 - Inside handles for flush track / C
3x RRAC904 - Plastic spacer for rail foot base / 10mm (pair)
2x RRSTA06 - SLII tray - 1165mm(l)X1156mm(L)
Material used :
Black epoxy powder-coated T6 aluminum
High-strength steel
Approximate installed weight: 34.13kg (75.24lbs)
The T-slot on the top and bottom of the crossbar plate accommodates an 8mm bolt (standard).
To determine the height of the roof rack mounting foot so that the roof rack does not touch the roof of the vehicle, check the crown of the roof with a ruler to ensure the correct height of the mounting foot.
If your Slimline II needs feet, add the height of the Slimline II tray (50mm/2") to the height of the feet to determine the height of the gallery from your gutter.
If your Slimline II gallery requires Foot Rails, add the height of the Slimline II tray (50mm/ 2'') to the height of the Foot Rails to determine the gallery height from the highest point of your vehicle's roof.
Delivery dimensions:
Width: 445mm (18'')
Length: 1720mm (68'')
Height: 160mm (6'')
Shipping weight :
Weight: 43kg (95lbs)
Instructions
Instructions
All Front Runner galleries come with a mounting guide and all the components needed to install the Slimline II tray on your vehicle.
NOTE: your vehicle must be equipped with original roof rails to use this roof rack kit.
This roof rack kit can be removed, leaving your vehicle's original roof and rails in their original condition.
All Front Runner roof racks come with a limited lifetime warranty*.
Roof racks mounted on original rails are designed as a "lightweight" loading solution. Please consult your vehicle owner's manual for the manufacturer's recommended load rating and do not exceed these limits.
For optimum load capacity, we recommend that there are no overhangs (with the exception of sports equipment) and that all weight is evenly distributed on the rack.
Motored roof rack kits on original rails are not suitable for extreme off-road conditions, so you should consider an alternative Front Runner mounting solution if this is your objective.
Please contact us for advice on mounting solutions specific to your vehicle and its use.
NOTE: Tables under roof racks are not suitable for this roof rack kit.
Please note: The maximum load for kits with original vehicle side rail mounting with ''Grab-on'' feet must not exceed 40 kg and must be evenly distributed.
KRSV004T - Slimline II roof rack kit for Suzuki Grand Vitara (2022- to present)
Consists of :
2x GOFR001 - Rail foot base (pair)
2x GOFR014 - External handles for flush rail / No. 6
2x GOFR032 - Inside handles for flush track / C
3x RRAC904 - Plastic spacer for rail foot base / 10mm (pair)
2x RRSTA06 - SLII tray - 1165mm(l)X1156mm(L)
Material used :
Black epoxy powder-coated T6 aluminum
High-strength steel
Approximate installed weight: 34.13kg (75.24lbs)
The T-slot on the top and bottom of the crossbar plate accommodates an 8mm bolt (standard).
To determine the height of the roof rack mounting foot so that the roof rack does not touch the roof of the vehicle, check the crown of the roof with a ruler to ensure the correct height of the mounting foot.
If your Slimline II needs feet, add the height of the Slimline II tray (50mm/2") to the height of the feet to determine the height of the gallery from your gutter.
If your Slimline II gallery requires Foot Rails, add the height of the Slimline II tray (50mm/ 2'') to the height of the Foot Rails to determine the gallery height from the highest point of your vehicle's roof.
Delivery dimensions:
Width: 445mm (18'')
Length: 1720mm (68'')
Height: 160mm (6'')
Shipping weight :
Weight: 43kg (95lbs)
Instructions
Instructions
KRSV004T
Specific References
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been added!
Your review cannot be sent