Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) Slimpro Van Rack Kit

\nCompatible with the Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) vans with an OEM Track with a vehicle length of 5986mm / 235.7''. \nLoad-carrying area: 3928mm (154.6'') x 1456mm (57.3''). \nTwelve (12) Mounting Feet secure into van's existing factory mounting points. \nIncluded Slat Bracket can be inverted for a lower profile at 116mm (4.6'') height, or left in standard configuration at 158mm (6.2''). \nCompatible with most Front Runner side mount accessories. \nSlats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. \nFitment guide and all mounting hardware are included. No drilling or modification required. \nAll Front Runner racks are backed by a limited lifetime warranty.* \n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit. KVVC005T - Volkswagen Crafter (L3H2/ MWB/OEM Track) (2017-Current) Slimpro Van Rack Kit \nConsisting of:6x FAVF005 - Volkswagen Crafter Van Rack Foot Set / 65mm1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit4x RRNS1345 - Narrow Slat / 1345mm (Pair)2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm Lip \nMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steel \nAssembled Rack Kit Dimensions:3180mm (125.2'') L x 1460mm (57.5'') W x 85mm (3.4'') H \nApproximate Installed Weight: 32kg (70.55lbs) \nVolkswagen Crafter Van Rack Kit heights are adjustable from 116mm (Z bracket inverted) to 158mm (Z bracket standard mounting) all measurements are taken from bottom of roof ditch to top of the rack slat. \nThe slat T slots and side profiles take standard M8 hex bolts top and bottom. \nShipping Dimensions:Width: 445mm (18'')Length: 1720mm (68'')Height: 190mm (7'') \nShipping Weight:Weight: 38kg (84lbs)